Durable rubber, jaw-style clamps with adjustable straps let you carry a fire extinguisher, air tank, and more on your vehicle's roll bar. Includes 2 brackets that fit 1" to 2" diameter roll bars and 2 Super Quick Fist clamps.
Features:
Specs:
Note: Tie-downs must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the tie-downs being used. For example, if you are using tie-downs with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 tie-downs to safely secure that load.
This Quick Fist Super clamp kit is perfect for securing tools and equipment such as a fire extinguisher, an air tank, and more on your vehicle's roll bar. They can also be installed permanently on your vehicle or trailer or on the wall in your garage or shed. You won't have to waste time re-installing temporary holding devices such as bungees or straps each time you need to transport or organize your gear. Plus the durable rubber construction is ideal for outdoor use.
These clamps have a jaw-style design with built-in, adjustable straps to provide a secure grip on equipment that is 2-1/2" to 9-1/2" in diameter. Simply push the straps down and secure them into 1 of the 3 locking sections to achieve tightly clenched "fists" around your cargo. Raised bumps on the interior surface act as gripping pressure points that help hold your gear in place.
Quick Fist Super clamps are made of strong, durable rubber that withstands the elements. These 1-piece, molded rubber clamps have no metal parts that will corrode so you can drive on salt-treated roads without worry. The UV-resistant rubber won't fade or crack from exposure to sun, and it has an operating temperature range from -60 F to 140 F. The shock-absorbing rubber also protects your equipment from scratches and scuffs.
To set up your roll bar or to carry gear, first bolt a Quick Fist Super clamp (sold separately) onto the mounting bracket. Wrap one of the provided protective neoprene strips around the roll to protect it from scratches and to help prevent the mounting bracket from sliding. Then thread a hose clamp through the mounting bracket and wrap it around your roll bar or bull bar for a secure attachment.
Quick Fist Super clamps must be mounted horizontally so that the entire length of the clamps are supported by the bracket.
Quick Fist Super clamps can be installed on your tailgate, in your truck bed, on your trailer frame, inside an enclosed trailer, or on any flat surface on your vehicle. You can use the clamps in your garage, shed, or maintenance closet to hang shovels, rakes, mops, and brooms. The clamps can be mounted vertically or horizontally to meet your needs.
Each Quick Fist Super clamp has 3 pre-drilled holes in the base for easy installation. Use three #10 bolts or screws (not included) to secure each clamp to your vehicle or wall. Molded plastic washers (included) fit perfectly over the pre-drilled holes to act as protective buffers between the hardware and the rubber clamps.
Note: Quick Fist clamps are not to be used on exhaust pipes or any pipe that consistently exceeds a temperature of 180 F (82 C).
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a quick look together at these Quick Fist super clamps for roll bars. Now these jaw style clamps are going to let you transport a fire extinguisher, air tank, or other equipment on your vehicle's roll bar. This is going to work great on emergency vehicles, work trucks, off-road vehicles, military vehicles, ATVs and boats. The built-in adjustable straps, that I was already showing you here previously, they're gonna give you a tight grip on your gear and this has the capacity for objects from two and a half inches to nine and a half inches in diameter. These push straps, you're just going to push these straps down rather and secure them into one of the three locking sections that you see here on the straps here to achieve a tightly clenched fist, if you will, around your cargo.
The raised bumps on the interior surface are going to act as like gripping pressure points that's going to help hold your gear in place. Hopefully you can see that just a little bit there. Those ridges there, those bumps. So you just have a safe working load limit for two clamps with roll bars, less than half an inch, an inch and a half in diameter of 50 pounds. So again, let me repeat that.
A safe working load limit for two clamps on roll bars with less than one and a half inches in diameter. These are gonna have a safe working load limit of 50 pounds. Then with roll bars that are one and a half inches and larger in diameter, they're gonna have a safe working load limit of a hundred pounds. The mounting footprint on your roll bars is gonna be about six inches by seven, eights inches. This is going to be a pretty quick and easy installation.
It's going to mount with three number 10 bolts or screws, which are sold separately per clamp, and it does require some drilling for installation on a flat surface. This molded rubber construction is going to withstand heat, cold, road, salt and UV rays. And just a a final note, Quick Fist clamps are not to be used on exhaust pipes or any pipe that consistently exceeds a temperature of 180 degrees Fahrenheit. Just so you know. Well, I think that's gonna wrap up our quick look today.
I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
Quick delivery...thanks
Great product
Works great . Used for fire bottles
Works great.
Awesomeness,
Product is solid...
Make sure to stretch clamp as shown in video to expand its circumference...
Great product
AAA+++ FAST SHIPPING THANKS
So happy with my purchase. This product is exactly what I was looking for. Made of quality ma
Quick shipping, engaged seller.
Great Item. I'm actually using 2 of these to secure an electric scooter on a cargo carrier. Works perfect!
Item worked perfectly for my needs. I've ordered 4 of them.
These straps have worked well and have handled the weather extremes we have here in MN. Hope to get many more years out of them.
I was hoping something like this existed to hold my homdee solar rv shower, I did an internet search and Voila! Complete with UV resistance for rooftop mounting. Awesome product.
Just received the E-Track chocks for my cargo trailer. They were back ordered but everything else I ordered arrived quickly and in good shape. The chocks took a little while but the communication was very good from Cathy T. at etrailer, the customer service is outstanding.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.